24.00R35 and 27.00R49 tyres for mining dump trucks

Large rigid dump trucks in mines use radial off-road tyres in sizes 21.00R33, 24.00R35 and 27.00R49. These three sizes differ in load, pressure and speed rating. This article explains how to read the markings, the load table by pressure and the tread pattern by mine conditions.

Which tyre sizes do mining dump trucks use?

Short answer: heavy-duty mining dump trucks usually use radial off-road tyres in 21.00R33, 24.00R35 or 27.00R49. The smaller sizes in this group carry less load; at a pressure of 700 kPa, the 24.00R35 (2-star) carries 18,500 kg and the 27.00R49 carries 27,250 kg per tyre. Choose the size by the vehicle's actual axle load, then choose the tread pattern by the road surface.

These sizes belong to the radial off-road tyre (OTR) range of SAMSON and ADVANCE, manufactured by Guizhou Tyre (GTC Global) in China. Read first what an OTR tyre is and how to choose mining off-road tyres.

Meaning of the 24.00R35 and 27.00R49 markings

The marking has three parts. Taking 24.00R35 as an example:

  • 24.00: the nominal section width of the tyre, in inches.
  • R: radial construction (radial steel ply).
  • 35: the rim diameter, in inches.

Similarly, the 27.00R49 is a radial tyre with a nominal width of 27.00 inches fitted to a 49-inch rim, while the 21.00R33 is fitted to a 33-inch rim. These sizes are not interchangeable at will. See how to read tyre specifications and the specification pages for 24.00R35 and 27.00R49.

Star rating and load index

Radial OTR tyres use a star count (1-star, 2-star, 3-star) instead of the ply rating (PR). The more stars, the higher the permitted load at the same size. The load index is followed by a speed letter, for example 209B: 209 is the load index and the letter B is a maximum speed rating of 50 km/h.

Load index by star rating
SizeStar ratingLoad index
24.00R352 sao209B
24.00R353 sao212B
27.00R492 sao223B

The 24.00R35 products currently in the catalogue (SAMSON and ADVANCE) are all 2-star. The 27.00R49 product is also 2-star, with a load index of 223B.

Load table by pressure

For OTR tyres, the maximum load depends on inflation pressure, not only on the load index. The table below is taken from the Guizhou Tyre OTR Radial catalogue (speed rating E/M, 50 km/h). Load unit: kg per tyre.

Maximum load by pressure, radial OTR tyres
Size550 kPa700 kPa800 kPa
21.00R3311.50014.00015.500
24.00R3515.500 (1 sao)18.500 (2 sao)20.000 (3 sao)
27.00R4922.400 (1 sao)27.250 (2 sao)—

The "—" sign means the catalogue gives no value. Do not inflate above the catalogue level for the correct size and star rating. For inflation principles and pressure measurement, see truck tyre pressure.

Tread patterns: ART, GLR04, GLR60, GLR56

The tread patterns currently available for the two main sizes:

Tread patterns for 24.00R35 and 27.00R49
SizeTreadBrandTread depthSpeed rating
24.00R35GLR04SAMSON, ADVANCE68.0 mmB (50 km/h)
24.00R35GLR60ADVANCE68.0 mmB (50 km/h)
24.00R35GLR56SAMSON, ADVANCE54.0 mmA2 (10 km/h)
24.00R35ARTSAMSON54.0 mmA2 (10 km/h)
27.00R49ARTADVANCE78.0 mmB (50 km/h)
27.00R49ARSADVANCE54.0 mmB (50 km/h)
27.00R49ART+, ART PROADVANCE54.0 mmA2 (10 km/h)

Deep treads (68 – 78 mm) with rating B suit vehicles hauling continuously on mine roads. Rating A2 (10 km/h) is only for very slow running. The GLR56 and ART codes of the 24.00R35 have no verified load index, so ask a technician before choosing.

Choosing the tread pattern by mine conditions

  • Sharp rock, blasted rock: prefer a deep tread to resist cuts (the 68 mm and 78 mm tread group).
  • Long, stable haul roads: choose speed rating B (50 km/h); running faster makes the tyre generate more heat, so load and pressure need to be controlled.
  • Very slow-moving areas: rating A2 can be used, but not for fast sections.

TKPH and tyre temperature: concepts to know

TKPH (tonne-kilometres per hour) is a measure used to compare the heat generated when OTR tyres haul heavy loads continuously. It reflects two factors: the average load on the tyre and the average speed. A tyre can withstand heat only up to a limit, so long haul roads, high loads and high speeds easily make a tyre overheat.

The permitted TKPH value of each tyre code is published by the manufacturer. This article does not give specific figures; request the TKPH specification for the tyre code you intend to buy.

Checks when buying mining dump truck tyres

  1. Size and rim: exactly 24.00R35 or 27.00R49, and the correct rim size for the vehicle.
  2. Star rating and load index: enough load per tyre; check against the load table by pressure.
  3. Speed rating and tread pattern: B or A2, and tread depth to suit the duty cycle and road surface.
  4. Unverified specifications: ask clearly about missing values instead of guessing.
  5. Appearance: casing, bead and sidewall free of cracks or bulges.

Maintenance for longer mining dump truck tyre life

  • Check pressure regularly when the tyre is cold, and do not adjust it while the tyre is hot.
  • Clear fallen and sharp rock from the haul road to reduce cuts and punctures.
  • Do not overload, do not exceed rating B speed: both increase heat.
  • Check for cuts, bulges and exposed plies after every shift so they can be dealt with early.

If you need to weigh long-term cost, see the article on tyre cost per km. The full range is available at OTR off-road tyres and the technical page.

Frequently asked questions

How much load does a 24.00R35 tyre carry?
According to the catalogue, at 700 kPa the 2-star 24.00R35 carries 18,500 kg. At 550 kPa it is 15,500 kg (1-star) and at 800 kPa it is 20,000 kg (3-star).
Which vehicles use the 27.00R49 tyre?
It is used on large rigid dump trucks in mines. The 2-star type carries 27,250 kg per tyre at 700 kPa, with a load index of 223B.
What does the letter B after the load index 209B mean?
It is the speed rating, corresponding to a maximum speed of 50 km/h. Rating A2 corresponds to 10 km/h.
How do GLR04 and GLR60 differ from GLR56?
GLR04 and GLR60 (24.00R35) have a tread depth of 68.0 mm and rating B (50 km/h). GLR56 has a depth of 54.0 mm and rating A2 (10 km/h).

Send a quotation request for mining dump truck tyres

The website only presents products and receives enquiries; it does not sell online. To receive a quotation, please contact us with: the dump truck model and axle load, current tyre size, tread pattern in use, mine road surface (rock, soil, haul road), average running speed and the quantity needed. A technician will check the load table, speed rating and tread pattern against the vehicle's duty cycle.

Need a tyre quotation?

Send your sizes and quantities and our sales team replies with a project quotation within 24 working hours.

Sizes that match this guide

Add them straight to the quotation request and send once.