How harsh is dump truck work?
Short answer: choose dump truck tyres by three things, in this order: enough load capacity per wheel, the correct fitting position (drive axle or all positions) and a tread pattern that suits the road surface. Roads with many rocks and mud need a block or lug tread with good grip; on roads that are mostly tarmac, a rib tread is usually smoother.
Dump trucks run loaded one way and empty on the return. The rear axle carries most of the load, the drive axle must pull the truck over soft ground, and the road surface has sharp stones and potholes. As a result, dump truck tyres are prone to cuts, punctures and uneven wear. Work out the share of dirt road and tarmac for your truck before choosing the tread.
Radial or bias tyres for dump trucks?
The sizes in this article (11.00R20, 12.00R20, 12.00R24, 12R22.5) are all radial tyres, with the letter R in the code. Steel-belted radials dissipate heat well under heavy loads, so they are common on dump trucks. Bias (cross-ply) tyres are still used on some slow-moving equipment.
Reading Guizhou tread codes: S, A, D, T
SAMSON and ADVANCE tread pattern codes from Guizhou Tyre (for example GL618A+, GL663D) end in a letter that shows the recommended fitting position:
- S: steer axle (front axle).
- A: all positions.
- D: drive axle.
- T: trailer.
For dump trucks, the two letters to remember are A and D. A tread pattern ending in A can be used in several positions, which suits fleets that want matching tyres. A tread pattern ending in D, such as GL663D and GL686D, is aimed at the drive axle, where the tyre has to transmit traction. The "+" next to the letter A (as in GL618A+) still indicates a tread pattern for all positions.
Rib, lug and block tread: choose by road surface
| Tread type | Suitable when |
|---|---|
| Rib | Mostly tarmac; needs directional stability and a smooth ride |
| Lug / block | Lots of soil, rock and mud; needs traction on the drive axle |
| Mixed | Trucks alternating between dirt and tarmac roads |
Typically, the steer axle uses a rib tread to hold direction, and the drive axle uses a lug or block tread for traction. For matching tyres throughout, choose an all-position tread pattern (letter A).
Common dump truck tyre sizes
Figures are taken from the SAMSON and ADVANCE specification catalogue; loads are given as single / dual fitment.
| Size | PR | Load index | Max load (single / dual) | Max pressure |
|---|---|---|---|---|
| 11.00R20 | 18PR | 152/149 | 3.550 / 3,250 kg | 930 kPa (135 PSI) |
| 12.00R20 | 20PR | 156/153 | 4.000 / 3,650 kg | 900 kPa (131 PSI) |
| 12.00R24 | 20PR | 160/157 | 4.500 / 4,125 kg | 900 kPa (131 PSI) |
| 12R22.5 | 18PR | 152/149 | 3.550 / 3,250 kg | 830 – 930 kPa (120 – 135 PSI), depending on tread pattern |
The 12.00R20 size also has a 22PR version (load index 158/155, load 4.250 / 3,875 kg) for vehicles that need more load margin. The 12.00R24 size has an additional 3-star version with the GL909A tread pattern, load index 164/162, load 5.000 / 4,750 kg. See the specifications for 11.00R20, 12.00R20 and the article on 11.00R20 truck tyres.
Tread depth and speed: two easily overlooked specifications
Deep tread gives more material to wear but usually comes with a lower speed rating. In the 12.00R20 size, the GL618A+ tread pattern is 19.5 mm deep with speed rating J (100 km/h), while the GL912A+ tread pattern is 25 mm deep with speed rating F (80 km/h). The 12.00R24 3-star GL909A is 31.3 mm deep, with speed rating G (90 km/h).
Trucks that run at high speed on tarmac should pay attention to the speed rating. Trucks that only work inside a mine or on a site are well served by deep tread and ratings F and G.
Pressure and overload protection for dump trucks
Dump trucks are often overloaded. An overloaded tyre heats up, the steel belt fatigues and the sidewall cracks. Pressure lower than specified makes the sidewall flex more and generate heat; pressure that is too high makes the tyre more prone to cuts from sharp rocks.
- Work out the load per wheel: divide the actual axle load by the number of wheels and choose a load index greater than or equal to it; see choosing tyres by load.
- Measure pressure when the tyre is cold: use the table for the exact size and PR, see truck tyre pressure.
Use the load-based tyre selection tool for a quick check.
What to check before buying dump truck tyres?
- Tyre and rim size: matches the size currently in use.
- Load index and PR: enough for the load per wheel; read it using how to read truck tyre specifications.
- Tread pattern and final letter: correct for the fitting position (S, A, D, T) and for the road surface.
- Speed rating: suits the truck's actual speed.
- Origin: part of the SAMSON and ADVANCE TBR range is made at Long Giang Industrial Park, Tien Giang, and the rest in China.
- Matched pairs: two dual tyres of the same size, same tread pattern and similar wear.
Frequently asked questions
- Should dump truck tyres use rib or lug tread?
- For mostly tarmac roads, rib tread is usually smoother on long tarmac runs. With lots of soil, rock and mud, lug or block tread grips better, especially on the drive axle.
- What does the letter D at the end of a tread code such as GL663D mean?
- It marks a tread pattern for the drive axle. S is the steer axle, A is all positions, T is trailer.
- Which tyre sizes do dump trucks usually use?
- Common sizes are 11.00R20, 12.00R20, 12.00R24 and 12R22.5. The exact size depends on the rim, axle load and vehicle configuration, so check it against the registration inspection papers.
- Should I lower dump truck tyre pressure for more grip?
- No. Pressure lower than specified makes the tyre generate heat and damages the sidewall. For better grip, choose a suitable tread pattern instead of lowering the pressure.
Send a quotation request for dump truck tyres
The website only presents products and receives requests; it does not sell online. To get advice and a quotation, contact us with: vehicle type and load, current tyre size, the axle position to be replaced, quantity, and the share of dirt road and tarmac. Very large dump trucks used in mines belong to the OTR off-the-road tyres group; for standard dump trucks, see TBR truck tyres.
Need a tyre quotation?
Send your sizes and quantities and our sales team replies with a project quotation within 24 working hours.
Sizes that match this guide
Add them straight to the quotation request and send once.




