ADVANCE E-4J 18.00-25 port tyre | Bias vs 18.00R25 radial

The ADVANCE E-4J 18.00-25 40PR is listed in the port and bias OTR range. The 18.00R25 GLR09 is a radial OTR tyre. On a reach stacker, verify the construction and specification the equipment maker approves for the wheel position concerned.

How 18.00-25 differs from 18.00R25

On the entries below, the hyphen in 18.00-25 appears on the bias specification, while R in 18.00R25 indicates radial construction. Both share a nominal 25-inch rim diameter. Confirm the width and contour of the rim, the overall diameter and the clearances for the approved fitment.

Two ADVANCE catalogue examples

Two ADVANCE catalogue examples
SizeStructurePly or star ratingTread pattern
18.00-25Bias40PRE-4J
18.00R25Radial★★★GLR09

Record the terminal duty cycle

For a reach stacker, record the machine model, typical container loads, lifting reach, wheel position, laden travel distance, speed and working surface. Consult the machine's load chart as the reach changes. The equipment's nominal tonnage alone gives too little information to specify a tyre load.

Order the E-4J by its complete specification

Send sidewall and rim-stamp photos, the full size including the hyphen or R, tread pattern, ply or star rating, wheel position and quantity. Ask for the documentation or a label photo confirming the quoted 40PR version.

Frequently asked questions

Frequently asked questions

Can the sizes be interchanged because both use 18.00 and 25?
Consider a switch only if the equipment maker approves the proposed size and construction and the rim, clearances, load and speed all meet its requirements.
When should I include lifting reach in a quote request?
On equipment such as reach stackers, axle load changes with container weight and lifting position. Include typical working conditions and the machine load chart limits.

Need a tyre quotation?

Send your sizes and quantities and our sales team replies with a project quotation within 24 working hours.

Sizes that match this guide

Add them straight to the quotation request and send once.