ADVANCE, SAMSON and Guizhou Tyre: how are they related?
Short answer: Guizhou Tyre (GTC Global) is the manufacturer. ADVANCE and SAMSON are two tyre brands produced by this manufacturer. The catalogue on the website contains 303 products, of which ADVANCE accounts for 203 and SAMSON for 100.
Two brands from one manufacturer. When comparing products, compare specific specifications (size, PR, load index, tread pattern) rather than brand names alone.
Product range: TBR, OTR, bias and forklift
| Group | Number of products | View range |
|---|---|---|
| Truck and bus tyres (TBR) | 201 | TBR truck tyres |
| Radial OTR off-road tyres | 34 | OTR off-road tyres |
| Bias OTR tyres | 43 | Roller and bias tyre catalogue |
| Forklift and industrial tyres | 25 | Forklift and industrial tyre catalogue |
If the concepts are unclear, read what a TBR tyre is and what an OTR tyre is.
Place of manufacture
Part of the TBR tyres are manufactured at Long Giang Industrial Park, Tien Giang (Vietnam), totalling 79 products. The remaining TBR tyres and all OTR, bias and forklift tyres are manufactured in China. The origin is stated separately on each product.
The website owner confirms that the manufacturer holds IATF 16949 certification, the quality management standard of the automotive industry. This certification concerns the management system and does not replace inspection of the actual tyre.
Are ADVANCE tyres good? Evaluation criteria
No brand is good for every condition. The website has no sales figures or comparisons with other makers, so this article draws no conclusion of that kind. Instead, you can use the following criteria for any tyre:
- Correct specification: size, PR, load index and speed to suit the vehicle. See choosing tyres by load capacity.
- Tread pattern suited to conditions: sealed roads, mixed use or off-road work each call for a different tread pattern.
- Clear origin and product code: fully stated and matching the marking on the tyre.
- Warranty terms: products are covered under the manufacturer's standard warranty; ask clearly about the conditions that apply.
- Your own fleet's operating data: even wear, temperature, failure rate; compared with tyre cost per km.
How to read labels and product codes
Each product has a tyre size, a PR or star count, a tread pattern, a load index (LI) and a speed symbol. Example from the data: ADVANCE 11.00R20, 18PR, tread pattern GL682A, load index 152/149, speed K (110 km/h), tread depth 16.5 mm.
For OTR tyres, the tyre grade is written in stars (*, , *). How to read each symbol is covered in how to read truck tyre specifications. The manufacturer's detailed data is on the technical page.
What to check when choosing imported tyres
- Origin label: the origin stated on the product page and in the quotation must match the goods received.
- Load index: check against the vehicle's actual load per wheel.
- Marking and product code: clearly legible, not erased, and matching the delivery note.
- Warranty: ask clearly, in writing, about the scope, duration and conditions.
- Recommended pressure: take it from the specification's load table; see the truck tyre pressure guide in the knowledge section.
Choosing a product group by vehicle type
- Trucks, tractor units, buses: choose from the TBR group, starting from the tyre size and the actual load capacity.
- Construction, mining and quarry vehicles: choose from the OTR group; see how to choose mining off-road tyres.
- Forklifts: choose from the forklift and industrial group; see which type of forklift tyre to choose.
Each group has its own way of reading specifications and its own selection criteria. Choose the right group first, then compare individual sizes and tread patterns.
How is unverified information handled?
On some products, a specification shows the "—" sign, meaning it has not been verified. The website does not put guessed values in these cells. If you need that specification to make a decision, state it clearly in your quotation request so it can be confirmed before you order.
How to request a quotation
The website is a channel for presenting products and receiving quotation requests; it does not sell online and does not list prices. Prepare the tyre size, vehicle type, fitting position, road conditions and quantity. If you are unsure which size, try the tyre selection tool by load capacity first.
Once you have the information, send your quotation request through the contact page to receive advice on the correct specification.
Frequently asked questions
- What is Guizhou Tyre?
- It is the manufacturer (GTC Global) of the two tyre brands ADVANCE and SAMSON.
- How do ADVANCE and SAMSON differ?
- Same manufacturer. Compare by the specifications of each product, such as size, PR, load index and tread pattern, not by brand name alone.
- Are ADVANCE tyres good?
- A general claim cannot be made. Evaluate by the correct specification for the vehicle, a suitable tread pattern, clear origin, warranty and real-world results.
- Where are ADVANCE and SAMSON tyres made?
- Part of the TBR range is manufactured at Long Giang Industrial Park, Tien Giang (Vietnam); the rest, and all OTR, bias and forklift tyres, are manufactured in China.
- Can I buy tyres directly on the website?
- No. The website only presents products and receives quotation requests through the contact page.
Need a tyre quotation?
Send your sizes and quantities and our sales team replies with a project quotation within 24 working hours.
Sizes that match this guide
Add them straight to the quotation request and send once.




