Read 315/80R22.5 and identify the axle
315 is the nominal section width in millimetres, 80 is the sidewall height as a percentage of that width, R denotes radial construction and 22.5 is the rim diameter in inches. If the vehicle runs different sizes, record the markings on the axle being serviced. On duals, use the dual load rating and verify sidewall clearance under load.
Comparing GR-A, GM-A and GL278A
| Size | Single/dual load index | Speed symbol | Tread depth |
|---|---|---|---|
| ADVANCE GR-A 20PR | 156/150 | M | 15.5 mm |
| ADVANCE GM-A 22PR | 158/156 | G | 24.3 mm |
| SAMSON GL278A 20PR | 156/150 | L | 16 mm |
Figures are from the individual product listings. Read the load indices and speed symbols with the manufacturer's operating conditions.
Narrow the choice by speed and load
GR-A and GL278A share a 156/150 load index and have different speed symbols. GM-A has the highest load index of these three entries and carries a G speed symbol. If the required speed, load or axle position falls outside a candidate's limits, choose a version already approved for that duty.
What to send for a quotation
Provide a sidewall photo, vehicle model, axle position, single or dual fitment, loaded axle weight, quantity and delivery province. If you are considering two patterns, include operating speed and the road surface that makes up most of the route.
Frequently asked questions
- Can 315/80R22.5 directly replace 12R22.5?
- Check the vehicle manufacturer's approved alternatives, rim width, overall diameter, clearances, load and speed. Both sizes use a 22.5-inch rim diameter.
- Does 20PR specify the load limit?
- Use the exact tyre's load indices for single or dual fitment, then consult the corresponding load–inflation table.
Need a tyre quotation?
Send your sizes and quantities and our sales team replies with a project quotation within 24 working hours.
Sizes that match this guide
Add them straight to the quotation request and send once.



